Call: (828) 684-9709   |     Request Quote

DM-2 4th Axis Arrived!

Friday, May 19, 2017

By Hilary Mikowicz, Director of Communications

We have had another exciting and busy week here at AlphaTech. Two weeks ago, Stephen from Haas Automation was in the shop to set up the two DM-2 Machining Centers and give a few of our guys a tutorial on how to use and program the machines. The 4th axis for the DM-2 machines arrived this week and can be seen in the photo below. We are excited to get these machines up and start running parts on them in the next week or two. Check out our production machining capibilities and submit an RFQ today!

tutorial1 Deane, Michael and Charlie listening to Stephen from Haas give them a DM-2 tutorial. 4thaxis The 4th axis arrived!

We also have a little update from the AlphaTech Firearms Division...

18401956 1487382714627515 1054563916141168281 o


The guys working in the AlphaTech Firearms Division have done a fantastic job with these simple but sleek modifications. They added front cocking serrations and iron sights. They also added a Trijicon RMR. We may be a little biased but we think modified firearms look very sharp. They are visually pleasing and really add some flair to an already impressive firearm. Make sure you also check out our AlphaTech Firearms Facebook Page.


Firearms News From AlphaTech

Friday, May 5th, 2017

By Hilary Mikowicz, Director of Communications

Did you know that AlphaTech has vast experience with firearms? After years of manufacturing firearm components for other companies, AlphaTech has decided to offer products that are "Optimized for Concealed Carry"! Stay tuned...more to come in the days ahead.


We will be updating on our AlphaTech Firearms Facebook page with the latest in firearms news from ATI. Head on over and check it out!

The Haas DM-2 Machines Have Arrived!

Wednesday, May 3rd, 2017

By Hilary Mikowicz, Director of Communications

With the addition of two new Haas DM-2 High Speed Machining Centers to inventory, AlphaTech would like to share a few photos showcasing the arrival of these machines.



With these two DM-2 Machining Centers AlphaTech is excited to be able to expand its current contract manufacturing capacity.


AlphaTech expects lead times to be reduced and delivery to be exceptional with jobs produced on the DM-2.


Send us an RFQ today!



Follow AlphaTech on Facebook and Twitter for updates on news and events happening at ATI! And don’t forget to make sure you’re on the AlphaTech email list for newsletters delivered right in your inbox!


Join ATI's Email List

AlphaTech Purchases Two New High Speed Machining Centers

Friday, April 28th, 2017

By Hilary Mikowicz, Director of Communitations

AlphaTech, Inc. located in Fletcher, NC is scheduled to take possession of two new Haas DM-2 High Speed Machining Centers by the end of April 2017. The DM-2 is Haas’ latest release of high speed machines offering a spindle speed of 15,000 rpm, quick rapids of 61 m/min and a lightning-quick tool changer. Beyond the speed features, the machine boasts other notable features such as through-spindle coolant, power-failure detection, 4th axis capability and a Renishaw probe system making setup times five times faster and handling in-process inspections within the part program.

The acquisition of the Haas DM-2 machines will enable AlphaTech to expand its current capacity as a contract manufacturer. These machines were purchased to meet the production demands of some existing customers. Lead times will also be reduced and customers can expect an uptick in on-time delivery.

Joe Worley, Operations Manager at AlphaTech states, “In order to truly appreciate the speeds of the machines, you need to see them run.” One can do so on the Haas YouTube channel:

Haas VMC Comparison: VF-2, VF-2SS & DM-2

AlphaTech has been serving customers both nationally and internationally since 1999. The versatile machine shop is excited to extend the new capabilities of the Haas machines to both current and potential customers. Submit contract manufacturing RFQ’s and inquiries to: This email address is being protected from spambots. You need JavaScript enabled to view it.. The DM-2’s are scheduled to be in full production mode by the end of May 2017. Visit AlphaTech’s website to learn more about services offered, current equipment, customer testimonials, and more.

Employee Spotlight: Robert Young

Thursday, January 5, 2017

By Hilary Mikowicz, Director of Communications

AlphaTech Inc. is thrilled to introduce you to Robert Young this month. Robert recently completed the CNC Machinist Apprenticeship through ATI and the State of North Carolina. This 8000-hour certification program includes on-the-job training and graduation from a certified institution offering a machine technology program. Robert has developed a strong background in CNC machining over the 10 years he has been working at ATI.

Robert’s enthusiasm for his work is contagious and we are confident that he can handle any job we send his way. Robert was born in Asheville, NC. He attended Reynolds High School and then went on to attend Asheville-Buncombe Technical Community College. He currently resides in Fletcher, NC. His vision for the company is one where all customer expectations are exceeded. As you learn when talking with Robert, he is a man of great action.

Here are some intereryoungsting facts about him:

3 words that best describe you: Punctual, Integrity, Action

Currently listening to: Rock & Roll

Currently reading: Bushmaster Magazine

Favorite meal: Cheeseburger

Person or philosophy you most admire: John Wayne

Favorite quote: “Follow me, and I will make you fishers of men.” – Matthew 4:19 Inspiration to share: You make mistakes; mistakes don’t make you.

iso 2015 image  AIR ISO 9001 003 002

AlphaTech Inc.